Pixel Technologies

Menu

Data

  • Pixel Technologies
  • Products
  • Data

  • CT-PX2

    Serial Link Interface Encoder

    • CT-PX2

    Serial Link Interface Encoder

    The CT-PX2 interface module is a multi-protocol lift encoder providing a serial link interface for both the Galaxy CAN and Otis RSL and converting these into Pixel Technologies Mode 3 DataBus protocol, providing seamless integration from lift controller to Pixels audio & visual devices.

    Categories , ,

    Overview

    Its industrial-designed small form factor package makes for the perfect cost effective landing encoder interface solution for your installation.

    Downloads

    View CT-PX2 OTIS RSL Brochure

    Download CT-PX2 OTIS RSL Brochure

    View CT-PX2 Galaxy CAN Brochure

    Download CT-PX2 Galaxy CAN Brochure

    Dimension Drawings

    Features

    • GAL CAN Interface with Multi Baud Rate Support.
    • OTIS RSL Interface.
    • Pixel Technologies Mode 3 Output Protocol
    • Wi-Fi Connectivity & Configurable via a PC or Smartphone
    • 11 Lift Messages with Selectable Priority Mapping.
    • Mode 3 Output Demo Mode Simulation.
    • Supports up to 127 floor levels.
    • RGB Status Indication LEDs.
    • Over the Air (OTA) Firmware Updates via Wi-Fi.
    • Compact size – Dimensions 68(W) x 95.6(H) x 15(D).
    <h1>CT-E10<h1> <h2>Lift Encoder
    , , ,

    CT-E10

    Lift Encoder

    Operating Voltage

    12 – 24V DC (absolute maximum 33V DC)
    Operating Current

    65mA, 100mA with Wi-Fi Active
    Input Protocols

    GAL CAN, OTIS RSL
    Output Interface

    RS-485
    Output Protocols

    Pixel Technologies Mode 3
    Pixel DataBus Length

    Up to 64 nodes & 400m (max)
    Wi-Fi Access point

    802.11b/g/n
    Configuration

    On-Device HTTP Webserver
    Status Indication

    Status (RGB LED)
    Operating Temperature

    0 – 50°C
    Operating Humidity

    90% max relative humidity, noncondensing
    Mounting

    Surface mounting or DIN Rail
    Dimensions (mm)

    68(W) x 95.6(H) x 15(D)
    Read more

    CT-E10

    Lift Encoder

    The CT-E10 interface module converts OTIS RSL serial link or KONE SPI serial link to the Pixel Technologies DataBus protocol.

    Categories , , ,
    <h3>PI-70s<h3> <h5>7″ Lift Position Indicator<h5>
    , ,

    PI-70s

    7″ Lift Position Indicator
    Screen Model

    7"
    Display Type

    LCD
    Backlight

    Vibrant colour LED display
    Resolution

    800 x 480px
    Aspect Ratio

    15:9
    Viewing Area

    89.5 x 151.5mm
    Viewing Angle (H/V)

    78/178°
    Operating Voltage

    24V DC
    Operating Current

    0.19A
    Pixel DataBus

    RS-485 up to 64 nodes & 400m (max)
    Spec Programming Port

    Ethernet 100BASE-T (100Mbps)
    Operating Temp / Humidity

    0-50°C, 90% max RH non condensing
    Lantern and Gong output

    150ma (max) per output
    Dimensions (WxHxD) (mm)

    205 x 116 x 28
    Read more

    PI-70s

    7″ Lift Position Indicator

    The PI Lift Display range offers all the essential lift information in vibrant colour.
    With a 7” display size and a compact design they are ideal for tight fixtures and car operating panels.

    SKU PI-70s 7" Full Colour LCD Lift Display Categories , ,